Stone Touch, Inc

Professionally installing Stained Concrete, Polished Concrete, and Epoxy coatings nationally since 1954

Winegars Clearfield, Utah 2013
Winegars Clearfield, Utah 2013
How do you change the flooring in a functioning grocery store?
Stone Touch was tasked with solving that problem. The owner felt that the cost of maintaining the existing VCT floor was too high so they elected to go with a polished concrete floor.
We isolated sections of the floor, then starting at 11pm we removed the VCT, ground the glue off, polished, colored, and sealed the floors and re-opened the areas at 6am
Winegars Finished
Winegars Finished
As you can see the finished result looks modern, clean, and durable
Out of gallery
Recon Block Wall Private Residence  Riverton, Utah 2019
Recon Block Wall Private Residence Riverton, Utah 2019
Stone Touch was tasked with adding color to natural gray concrete block retaining walls around a pool. We used 5 different color of acid stain applied in layers to produce a natural rock look.
Recon Block wall
Recon Block wall
initial color on first wall
Recon Block wall
Recon Block wall
initial color on second wall level
Out of gallery
 Roots of Knowledge  Utah Valley University Orem, Utah 2017
Roots of Knowledge Utah Valley University Orem, Utah 2017
Utah Valley University is home to the world famous 'Roots of Knowledge' stained glass window. It is 10' high and 200' long, contains over 60,000 individual pieces of glass and took 12 years to complete.
Stone Touch was tasked with providing a floor that would enhance the viewing experience. A deep neutral color was installed with a high gloss polish to enhance the reflective quality.
Out of gallery
Star Mill  American Fork, Utah 2016
Star Mill American Fork, Utah 2016
The award winning Star Mill project is the renovation of an 1887 historic mill in American Fork, Ut.
The original concrete was not suitable for various reasons so a new slab was poured over the existing concrete.
In order to bond the 2 slabs an epoxy bonding agent was spread and new concrete was placed over the wet epoxy. Once cured the slab was polished. Some of the original concrete was stained and sealed.
Star Mill epoxy bonding agent
Star Mill epoxy bonding agent
The existing slab was first ground down and then an epoxy bonding agent is being spread. In the background the new concrete is being placed only minutes behind the epoxy.
Star Mill existing
Star Mill existing
Acid stain on existing concrete
Star Mill 3
Star Mill 3
Acid stain existing concrete
Star Mill exterior
Star Mill exterior
Out of gallery
Meadowlark Ranch  Preston, Idaho 2014
Meadowlark Ranch Preston, Idaho 2014
For this project Stone Touch was asked by a well known NBA client to provide a polished concrete basketball court.
To accomplish this we laid out a regulation NBA half court, then saw cut every court stripe and 3" wide "wood" plank.Every line was colored and every plank was hand painted with a slightly different color of dye to give the effect of wood planks.
Meadowlark Ranch 2
Meadowlark Ranch 2
saw cutting the lines
Out of gallery
  • Home
  • About
  • Portfolio Photos
  • Projects of Note 2018-Present
  • Projects of Note 2013-2017
  • Projects of Note 2000-2012
  • Featured Projects
  • Contact
BE IN 
TOUCH

Salt Lake City, Utah

801-281-2299  www.stonetouch.com

© 2020 Stone Touch

  • White Facebook Icon
  • White Twitter Icon
  • White Instagram Icon